stainless wire balustrading handrailing

Stainless Cable Wire is actually a pipe used to pass wires and cables, and it is also an electrical equipment. It is used for some places where cables or wires are required to pass through houses, underground, or very easily damaged cables, and these places must require cables or wires. Wires go through. In addition, the whole process of 304 Stainless Steel Cable pipe project construction should be done firstly lay the cable protection pipe according to the engineering drawings, and then put the cables and wires into the stainless steel wire pipe or cold elbow to reach the high-power electrical appliances, pay attention to the horizontal and vertical when wiring. . In addition, the main functions of the stainless steel wire tube are: (1) to avoid damage to the cable sheath of the cable wire. If buried in the mixed mortar immediately, the aluminosilicate will erode the cable jacket of the cable wire, causing the Stainless Steel Cable Rope insulation to drop and cause a short circuit failure. 2) Avoid fire accidents. In the event of a short-circuit failure of a household appliance that causes the cable sheath to catch fire, the Black Stainless Steel Cable tube has the effect of blocking the spread of the flame. If the stainless steel wire tube is not installed, there are other wire materials or flammable items on the side of the cable, which will be dangerous. (3) Heat dissipation effect. Since the cross-section of the transmission line is determined by the load, some space is generally reserved when routing the wires, which can give the wires space to dissipate heat and prevent the wires from overheating and affecting the life of the wires.