1X19 stainless steel wire rope 8mm 316

The use of rope clips should pay attention to the following matters:

(1) The size of the Stainless Turnbuckle should be suitable for the thickness of the Stainless Steel Wire Ropes. The inner clear distance of the U-shaped ring should be 1-3mm larger than the diameter of the wire rope. If the clear distance is too large, the rope will not be easily clamped.
(2) When using, tighten the U-shaped bolts until the wire rope is flattened by about 1/3. Since the wire rope is deformed after being stressed, the rope should be tightened a second time after the SS Wire Rope is stressed to ensure the firmness of the joint. If you need to check whether the rope clip slips after the Stainless Cable Wire is under force, you can attach a safety rope clip to do it. The safety rope clip is installed about 500mm away from the last rope clip. Release the rope end for a safety bend and then clamp it with the main rope, so that if the clip slips, the safety bend will be straightened, which is easy to find and reinforce in time. .
(3) The arrangement spacing between the rope clips is generally about 6 to 8 times the diameter of the wire rope. The rope clips should be arranged in one order. The U-ring part should be clipped on the side of the rope head, and the pressure plate should be placed on the side of the main rope.
(4) The fixing method of the Steel Shackles end: Generally, there are two kinds of single tack and double tack.
Single set knot, also known as cross knot, is used for both ends of wire rope or fixed rope.
Double Tackle knots, also known as double cross knots and symmetrical knots, are used at both ends of the wire rope and can also be used for rope end fixing. Precautions for the use of Wire Rope Clips: It cannot be used for a long time, and cannot be used repeatedly.