1X19 stainless steel wire rope 9/16in 316

1. Point contact: The adjacent layers of Stainless Steel Wire Ropes in the strand are in the form of point contact. Except for the central steel wire, the diameter of each layer of steel wire is equal, and the strands are formed by layered twisting.
2. Line contact: The adjacent layers of SS Wire Rope in the strand are in the form of linear contact, and the strands are made by twisting steel wires of different diameters at one time.
3. Surface contact: There is a surface contact between the adjacent layers of steel wires in the strand.
4. Point and line contact Stainless Steel Wire Rope: There are two contact forms of point and line between adjacent layers of steel wire in the strand. The strands are made of graded twisted steel wires of different diameters.
5. Special-shaped strand 304 Stainless Steel Wire Rope: The special-shaped strand stainless Steel Wire Rope is named for its triangular, oval or fan-shaped section.
6. Vinyl Coated Wire Rope: The surface of the steel wire is galvanized (or drawn after galvanizing), and then twisted into a stainless steel wire rope.
7. Twist direction of stainless steel wire rope: the so-called wire rope (or strand) twist direction refers to the direction of the helix in which the strand is twisted in the rope (or the wire is in the strand). Judgment method: place the rope (or strand) vertically and observe, if the spiral upward direction of the strand (wire) is from left to right, it is a left twist, which can be represented by ".